Unique Industries Honda GX690 - Manual (Page 17)

ENGLISH
Air Index
Descriptive Term Applicable to Emissions Durability Period
Specifications
MAINTENANCE ITEM
Tuneup Specifications
Quick Reference Information
SPECIFICATION
GX630 (QAF-Type)
GX660 (TAF-Type)
GX690 (TAF-Type)
GX630/660/690
17
The bar graph is intended to provide you, our customer, the ability
to compare the emissions performance of available engines. The
lower the Air Index, the less pollution.
Extended
Intermediate
Moderate
125 hours (0 80 cc, inclusive)
250 hours (greater than 80 cc)
50 hours (0 80 cc, inclusive)
125 hours (greater than 80 cc)
300 hours (0 80 cc, inclusive)
500 hours (greater than 80 cc)
1,000 hours (225 cc and greater)
An Air Index Information label is applied to engines certified to an
emission durability time period in accordance with the
requirements of the California Air Resources Board.
405 410 438 mm
(15.9 16.1 17.2 in)
44.4 kg (97.9 lbs)
688.0 cm (41.97 cu-in)
[78.0 72.0 mm (3.07 2.83 in)]
15.5 kW (21.1 PS, 20.8 bhp) at 3,600 rpm
48.3 N·m (4.93 kgf·m, 35.6 lbf·ft)
at 2,500 rpm
Length Width
Height
Dry mass [weight]
Engine type
Displacement
[Bore
Stroke]
Net power
Max. Net torque
Engine oil capacity
Cooling system
Ignition system
PTO shaft rotation Forced air
CDI type magneto ignition
Counterclockwise
Length Width
Height
Dry mass [weight]
Engine type
Displacement
[Bore
Stroke]
Net power
Max. Net torque
Engine oil capacity
Cooling system
Ignition system
PTO shaft rotation
429 450 438 mm
(16.9 17.7 17.2 in)
45.3 kg (99.9 lbs)
688.0 cm (41.97 cu-in)
[78.0 72.0 mm (3.07 2.83 in)]
16.0 kW (21.8 PS, 21.5 bhp) at 3,600 rpm
48.3 N·m (4.93 kgf·m, 35.6 lbf·ft) at
2,500 rpm
Forced air
CDI type magneto ignition
Counterclockwise
Length Width
Height
Dry mass [weight]
Engine type
Displacement
[Bore
Stroke]
Net power
Max. Net torque
Engine oil capacity
Cooling system
Ignition system
PTO shaft rotation
429 450 438 mm
(16.9 17.7 17.2 in)
45.3 kg (99.9 lbs)
688.0 cm (41.97 cu-in)
[78.0 72.0 mm (3.07 2.83 in)]
16.5 kW (22.4 PS, 22.1 bhp) at 3,600 rpm
48.3 N·m (4.93 kgf·m, 35.6 lbf·ft) at
2,500 rpm
Forced air
CDI type magneto ignition
Counterclockwise
The power rating of the engine indicated in this document is the
net power output tested on a production engine for the engine
model and measured in accordance with SAE J1349 at 3,600
rpm (Net Power) and at 2,500 rpm (Max. Net Torque). Mass
production engines may vary from this value.
Actual power output for the engine installed in the final machine
will vary depending on numerous factors, including the
operating speed of the engine in application, environmental
conditions, maintenance, and other variables.
The durability description is intended to provide you with
information relating to the engine’s emission durability period.
The descriptive term indicates the useful life period for the engine’s
emission control system. See your
Emission Control System
Warranty for additional information.
Refer to page 10 Spark plug gap
Idle speed
Valve clearance
(cold)
U. S.
Except
U. S. Pump octane rating 86 or higher
Research octane rating 91 or higher
Pump octane rating 86 or higher
No other adjustments needed.
0.7 0.8 mm
(0.028 0.031 in)
1,400 150 rpm
ZFR5F (NGK)
IN: 0.08 0.02 mm
EX: 0.10 0.02 mm
1.5 L (1.6 US qt, 1.3 lmp qt)
1.7 L (1.8 US qt, 1.5 lmp qt)
1.5 L (1.6 US qt, 1.3 lmp qt)
1.7 L (1.8 US qt, 1.5 lmp qt)
1.5 L (1.6 US qt, 1.3 lmp qt)
1.7 L (1.8 US qt, 1.5 lmp qt)
Fuel
Engine oil
Spark plug
Maintenance
Unleaded gasoline (Refer to page 7 ).
SAE 10W-30, API SJ or later, for general use.
Refer to page 8.
Before each use:
Check engine oil level. Refer to page 8.
Check air filter. Refer to page 9.
First 20 hours:
Change engine oil. Refer to page 8.
Subsequent:
Refer to the maintenance schedule on page 7.
(Models certified for sale in California)
Without oil filter replacement:
With oil filter replacement:
Without oil filter replacement:
With oil filter replacement:
Without oil filter replacement:
With oil filter replacement:
4-stroke, overhead valve, 2 cylinders (90° V-Twin)
4-stroke, overhead valve, 2 cylinders (90° V-Twin)
4-stroke, overhead valve, 2 cylinders (90° V-Twin)
(in accordance with SAE J1349 )
(in accordance with SAE J1349 )
(in accordance with SAE J1349 )
(in accordance with SAE J1349 )
(in accordance with SAE J1349 )
(in accordance with SAE J1349 )
See your authorized
Honda dealer
See your authorized
Honda dealer
Other specifications
09/07/07 20:38:32 32Z6L600_017