SENA Parani-ESD100-110-200-210 - Manual (Page 25)

25
Figure 3-18 ParaniWizard Step 9
Now the configuration of ESD1 and ESD2 has been completed. Now when the units are turned off and
then turned on again, they will make an automatic connection to each other.
3.8 ParaniUpdater
Parani-ESD supports firmware updates. You can download new firmware images for the Parani-ESD
at
http://www.sena.com . With the ParaniUpdater, you can update the firmware of Parani-ESD by
selecting the firmware image file and pushing Start button.
* Note: DO NOT power off Parani-ESD while the firmware update is progressing, this may damage the
Parani-ESD.
Figure 3-19 ParaniUpdater Window