2 connecting the hardware – SENA LS100W User Manual
Page 11
Advertising
11
Figure 2-1. The panel layout of the LS100W
2.2 Connecting the Hardware
This section describes how to connect the LS100W to the serial device for initial testing.
-
Connect a power source to the LS100W.
-
Connect the LS100W to a serial device through serial data cable.
2.2.1 Connecting the Power
Connect the power jack to the power connector of the LS100W using the DC power adapter that is
included in the package.
If power is properly supplied, the [Power] lamp will light up a solid red color.
Advertising