SENA LS100W - Manual (Page 26)

26
- ch: set channel number when adhoc mode
- WEP1: 0=none / 1=64bit / 2=128bit
- WEP2: a=ASCII type pass,h=Hexdecimal type pass
- WEP_Key: ASCII type = 5(64bit) or 13(128bit) character input,
- Hexdecimal type = 10(64bit) or 26(128bit) number input
Note :
If the type is set as infrastructure, channel will be set to the same value of the connected
AP internally regardless of the value set by the user.
Followings are example commands to set the wireless Lan settings of LS100W’,
* SSID= SENA, infrastructure , National Code=Korea, channel number=1, WEP1 = 64bit ,WEP2 =
Hexdecimal , WEP_Key=1234567890
> set wlan SENA i 6 1 1 h 1234567890
* SSID=Default, infrastructure ,National Code=Korea, arbitrary channel number, WEP Key disabled
> set wlan Defalut i 6 * 0(National Code : Korea, WEP Key disabled)
* SSID=Default, Adhoc , National Code=Korea, channel number=4, WEP Key disabled
> set wlan Default a 6 4 0
* SSID=Default 1, Adhoc , National Code=Korea, channel number=4, WEP Key disabled
(If there are space characters in SSID, you should use a double quotation mark to set SSID.)
> set wlan “Default 1” a 6 4 0