SENA PS810 User Manual
Page 101
101
(Read/WRite)------------------[
SUCCESS]
Port # 2 test in progressing(MODE)------------------------[
RS232]
(Read/WRite)------------------[
SUCCESS]
Port # 3 test in progressing(MODE)------------------------[
RS232]
(Read/WRite)------------------[
SUCCESS]
Port # 4 test in progressing(MODE)------------------------[
RS232]
(Read/WRite)------------------[
SUCCESS]
<--External Uart Test-->
Port # 1 test in progressing(MODE)------------------------[
RS232]
(Read/WRite)------------------[
SUCCESS]
(RTS/CTS)---------------------[
SUCCESS]
(DTR/DSR)---------------------[
SUCCESS]
Port # 2 test in progressing(MODE)------------------------[
RS232]
(Read/WRite)------------------[
SUCCESS]
(RTS/CTS)---------------------[
SUCCESS]
(DTR/DSR)---------------------[
SUCCESS]
Port # 3 test in progressing(MODE)------------------------[
RS232]
(Read/WRite)------------------[
SUCCESS]
(RTS/CTS)---------------------[
SUCCESS]
(DTR/DSR)---------------------[
SUCCESS]
Port # 4 test in progressing(MODE)------------------------[
RS232]
(Read/WRite)------------------[
SUCCESS]
(RTS/CTS)---------------------[
SUCCESS]
(DTR/DSR)---------------------[
SUCCESS]
*******
Hardware auto-detect and auto-test
SUMMARY *******
1. DRAM
Test -----------------------------------------[ PASSED]
2. FLASH
Test -----------------------------------------[ PASSED]
3. EEPROM
Test -----------------------------------------[ PASSED]
4. ETHERNET
Test -----------------------------------------[ PASSED]
5. UART Test Summary
-----------------------------------------------------------------------------
Port Number
|Port Mode | Data Communication Test | RTS/CTS | DTR/DSR |
-----------------------------------------------------------------------------
Port # 1(Internal) | UNKNOWN
|
FAILED
| SKIPPED | SKIPPED |
Port # 1(External) | UNKNOWN
|
FAILED
| FAILED
| FAILED
|
-----------------------------------------------------------------------------
Port # 2(Internal) | UNKNOWN
|
FAILED
| SKIPPED | SKIPPED |
Port # 2(External) | UNKNOWN
|
FAILED
| FAILED
| FAILED
|
-----------------------------------------------------------------------------
Port # 3(Internal) | UNKNOWN
|
FAILED
| SKIPPED | SKIPPED |
Port # 3(External) | UNKNOWN
|
FAILED
| FAILED
| FAILED
|
-----------------------------------------------------------------------------
Port # 4(Internal) | UNKNOWN
|
FAILED
| SKIPPED | SKIPPED |
Port # 4(External) | UNKNOWN
|
FAILED
| FAILED
| FAILED
|
Hardware test is end. Press any key to return the test menu!!
Figure A-12 Hardware test screen within Bios Menu Program
For each hardware component test, the user can skip a test by pressing the <ESC> key.
-------------------------------------------------------------------------------
Hardware Test
-------------------------------------------------------------------------------
Select menu
0. Test Mode - One Time
1. Auto test
2. DRAM test
3. FLASH test
4. EEPROM test
5. Ethernet test
6. UART Mode test
<ESC> Back, <ENTER> Refresh
-----> 1