SENA PS810 - Manual (Page 82)

82
 ForwDatagrams :
Specifies the number of datagrams forwarded.
 InUnknownProtos :
Specifies the number of locally addressed datagrams received successfully but discarded because of
an unknown or unsupported protocol.
 InDiscard :
Specifies the number of input IP datagrams for which no problems were encountered to prevent their
continued processing, but which were discarded (for example, for lack of buffer space). This counter
does not include any datagrams discarded while awaiting reassembly.
 InDelivers :
Specifies the number of received datagrams delivered.
 OutRequests :
Specifies the number of outgoing datagrams that an IP is requested to transmit. This number does not
include forwarded datagrams.
 OutDiscards :
Specifies the number of transmitted datagrams discarded. These are datagrams for which no
problems were encountered to prevent their transmission to their destination, but which were
discarded (for example, for lack of buffer space.) This counter would include datagrams counted in
Datagrams Forwarded if any such packets met this (discretionary) discard criterion.
 OutNoRoutes :
Specifies the number of datagrams for which no route could be found to transmit them to the
destination IP address. These datagrams were discarded. This counter includes any packets counted
in Datagrams Forwarded that meet this “no route” criterion.
 ReasmTimeout :
Specifies the amount of time allowed for all pieces of a fragmented datagram to arrive. If all pieces do
not arrive within this time, the datagram is discarded.
 ReasmReqds :
Specifies the number of datagrams that require reassembly.