Terminal program – SENA Promi-ESD02 User Manual
Page 21
Promi-ESD User Manual – Configurations
21
Copyright © 2006 Sena Technologies, Inc. All rights reserved.
Terminal Program
A terminal program is an application that will enable a PC to communicate
directly with a modem. If you are using Windows 98SE or higher version of
Windows, HyperTerminal program as it is included as part of the operating
system.
Promi-ESD
provides
some
extended
AT
commands
for
its
configurations on terminal program.
This manual will explain the method using HyperTerminal. If you need to install
HyperTerminal, click start>setting>control panel>add/remove programs. For
more precise information, please refer to Help of Microsoft Windows.
Attach Promi-ESD to serial port of host computer and power on.
Launch HyperTerminal. It can be found in start >programs >accessories
>communication >HyperTerminal. Select the Serial port that Promi-ESD will be
connected to.
Input the same settings into Serial port configuration window as Promi-ESD
settings.
The settings need to be set correctly, otherwise, error message may be shown
up on the screen or cause malfunctioning of Promi-ESD.