SENA Promi-ESD02 - Manual (Page 44)

Promi-ESD User Manual – Appendix A AT Commands
A- 6
Copyright © 2006 Sena Technologies, Inc. All rights reserved.
Description The Bluetooth devices in Inquiry scan mode nearby are
displayed with their BD addresses, Device names, and
Class of device.
Maximum 10 devices are scanned for 30 seconds.
Reference AT+BTSCAN, ATD, AT+BTINFO?
7 AT+BTLAST? 
Response 112233445566
OK
Purpose Display the BD address of the last connected device
Description The Bluetooth device connected to this Promi-ESD last
time is displayed with its BD address.
Reference AT+BTSCAN, ATD, AT+BTINFO?, AT+BTINQ?
8 AT+BTMODE,n

Response OK
Purpose Set operation mode
Parameters n =0: MODE0 (Default)
n =1: MODE1
n =2: MODE2
n =3: MODE3
Description When the operation status is ‘Pending’ currently, change
the status to ‘Standby’ with AT+BTCANCEL prior to this
command.
To take effect of this command, ATZ or power off and on.
Reference AT+BTINFO?
Example AT+BTMODE,2
OK
ATZ
9 +++
Response OK
Purpose Convert the operation status of ‘Connect’ to ‘Standby’
Description In ‘Connect’ status, data from host is transmitted to the
other side Bluetooth device, and any AT command is not