SENA Promi-ESD02 - Manual (Page 43)

Promi-ESD User Manual – Appendix A AT Commands
A- 5
Copyright © 2006 Sena Technologies, Inc. All rights reserved.
Purpose Set Serial parameters
Parameters Baudrate =
1200/2400/9600/14400/19200/38400/57600/115200/230
400 (Default=9600)
Parity =N/E/O (Default=N)
Stopbit =1/2 (Default=1)
Description The Serial parameters can be set or changed. The factory
default is 9600, N, 1.
To take effect of this command, ATZ or power off and on.
Reference AT, ATZ, AT&F, ATS
5 AT+BTINFO?
Response 112233445566,FriendlyName,Mode,Status,Auth,Encryp

OK
Purpose Display Bluetooth settings
Description The current Bluetooth settings are displayed including BD
address, Device name, Operation mode, Operation status,
Authentication, Data Encryption, and Hardware Flow
Control.
Mode=MODE0/MODE1/MODE2/MODE3
Status=STANDBY/PENDING/CONNECT
Auth=0/1 (Authentication is not activated when 0)
Encrypt=0/1 (Encryption is not activated when 0)
FlowControl=HWFC/NoFC
Reference AT+BTNAME, AT+BTMODE, AT+BTSEC, ATS14?
Example 000B530011FF,SENA,MODE0,PENDING,1,1,HWFC 
6 AT+BTINQ?

Response 112233445566,FriendlyName,CoD
112233445566,FriendlyName,CoD
112233445566,FriendlyName,CoD
OK
Purpose Search Bluetooth devices nearby