Xoro HRT 1285 - Manual (Page 57)

HRT 1285 5
Engl
ish
Power Supply
1.
Never touch the plug with wet hands.
2. If you want to pull the plug out of the plug socket, always pull directly on the plug.
Never pull on the cable as it could tear.
3. Make sure that the power cable is not bent, caught or run over and that it does
not come into contact with heat sources.
4. Make sure that the power cable is not wound around the device while in
operation.
5. Never place the machine on the power cable while it is being operated.
6. Only use extension cables that are designed for the power consumption level of
the machine.
7. Keep the appliance away from rain and any moisture.
8. Only operate the machine if the electrical voltage stated on the type plate beneath
the machine agrees with the voltage on your plug socket. The wrong voltage can
destroy the machine.
9. Do not stand vases etc. on the appliance. Water could seep into the appliance.
10. Do not open the appliance.
11. Pull out the mains plug if the appliance is not to be used over a longer period of
time.
12. Take care that nobody can trip over the power supply cable.
Antenna
The device can be connected to an antenna.
1.
Unplug the power cord cable from the mains outlet before connecting or
disconnecting the DVB-T to/from the antenna, otherwise both might be damaged.
2. If an outside antenna or cable system is connected to the product, be sure the
antenna or cable system is grounded so as to provide some protection against
voltage surges and built-up static charges.
SAFETY INFORMATION