Xoro HRT 1285 - Manual (Page 71)

HRT 1285 19
Engl
ish
Functions
It is possible to set the timer out of the EPG.
To do so mark a broadcast you want to
record and press BLUE. A window opens
with the recording settings. For a simple
recording the settings made from the EPG
are enough. Eventually you should set the
time a few minutes before the broadcast
begins and after the broadcast ends.
It it possible to program a maximum of 8 timers. Following options are available:
•
Timer number 1 to 8
•
Timer Mode disabled, once, daily, weekly, monthly, yearly
•
Wake up mode disabled, channel, activated, recorder
•
Wake up channel Define the channel which will be activated on waking up
•
Wake up date Date of wake up
•
Wake up time Time of wake up
•
Duration Define the duration of the broadcast
Press OK to confirm the settings. If there is a mistake in the programming there will
appear a note. If this happens check the time and date und if the channel works fine.
Press EXIT to leave the timer.
Timer programming out of EPG
Timer Programming