Xoro HRT 1285 - Manual (Page 79)

HRT 1285 27
Engl
ish
Eventually you have the possibility to update the firmware of the HRT 1285. Connect a
USB device and go to the menu “Software Update” and confirm with OK. Note that the
USB device may ONLY contain the update file. To start the update confirm “Load from
USB”.
Do not intercept the update!
You have the possibility to restore the HRT 1285 to its factory default settings.
The DVB-T receiver is set back to defaults. All TV channels, lists and other changed
settings will be lost and set to the factory defaults. Mind the area settings when
searching for channels and the video output; it is set back to CVBS and 4:3 PS.
Software Update
Configuration
Restore Factory Defaults