Connection – Xoro HRT 1285 User Manual
Page 65
HRT 1285 13
Engl
ish
Connection
•
Assure that the device is switched off and unplugged.
•
Read the manual of your TV and attend to the safety instructions.
•
Please establish an accurate connection.
•
Please check the video output settings. If your TV has a SCART input, choose
CVBS/RGB in “Setup -> TV System -> Video output.
1.
Connect a SCART cable to the DVB-T receiver and the TV.
2.
Connect the aerial cable to the aerial input (LNB IN) of the HRT 1285.
Screw the plug to the input.
3.
Connect the power cable and the plug to the wall outlet.
4.
Switch on your DVB-T receiver and the TV
5.
Choose the correct input at your TV
Note:
By using the loop through connector you can connect for example a second DVB-T
Receiver. It is possible to connect active and passive aerials.
Connecting TV and Aerial