SCANTECH ID (Champtek company) SG20 - Manual (Page 9)

Interface Manual Scantech SG-20 Discovery WLAN Rel 1.1 7
2.4 Input a Port number. The Port number should be 9999, which is a special
configuration port on the WLAN module. After connecting to it, a special configuration
menu appears.
2.5 Click on the button. The program will search for the unit on your local
network and try to make connection.
The following information (or alike) should appear on your monitor:
2.6 Hit
a a
and you’ll get in the Configuration screen:
(if you wait too long, the connection will fail and you have to disconnect and re-
connect)
All configuration information will scroll through your screen.
Below you find a short fragment: