GE Industrial Solutions A Series Lighting Control Panelboards Remote Switch Expansion Module ASRGLCDSK - Manual (Page 6)

6
Press the Fn key to display the outputs screen:
Press OK for the breaker 1 output display:
Press the down arrow key to see that nothing is attached to
this BO:
Press OK ; the following display may appear:
Press the up and down arrow keys until the MI object
appears:
Press OK again; the 1 will start flashing:
Use the numeric keys to change the switch number to any
of those in Table 2. Press
OK when the desired number
appears; this switch is now attached to BO1 and can be
used to control it.
Controlling Objects with a Switch – Case 3
Go to the Schedule submenu of the Lighting Group menu
by pressing the down arrow key from the Outputs
submenu (see Case 2).:
Press OK ; the following screen may appear:
Press OK again for the following display:
Press OK again and the flashing will change as follows:
Use the numeric keys to change MI to any number given
in Table 2. For instance, if 112 is entered, the display
appears as
Press OK to connect MI 112 to the group.
Controlling Objects with a Switch – Case 4
From the Schedule submenu, press the down arrow twice
to reach the Photocell submenu:
Press OK ; the following screen may appear:
Flashing
Flashing
Flashing
Flashing
Flashing
Flashing