Controlling objects with a switch – case 5 – GE Industrial Solutions A Series Lighting Control Panelboards Remote Switch Expansion Module ASRGLCDSK User Manual
Page 7
7
Press
OK
, then the up arrow key twice to reach the
following display:
Press
OK
to change the flashing characters as follows:
Use numeric keys to change the number from 1 to any
desired number, as listed in Table 2. Press
OK
, to link the
MI switch to the group through the photocell input.
Controlling Objects with a Switch – Case 5
From the photocell submenu, as in Case 4, press the down
arrow key to reach the Override submenu:
Press
OK
; the following screen may appear:
Press
OK
to display the following screen:
Use the arrow keys to change the BI display to MI:
Press
OK
to change the flashing characters as follows:
Use numeric keys to change MI to any value listed in
Table 2. Press
OK
to link the MI switch to the Group object
by override input.
Flashing
Flashing
Flashing
Flashing
Flashing