GE Industrial Solutions WavePro Low-Voltage Power Circuit Breakers - Manual (Page 35)

MicroVersaTrip Plus™ and MicroVersaTrip PM™ Trip Units
Chapter 4. Status Mode
27
Trip Operations Counter Display
Trip operations counters record the total number of over-
current trips. To review any of the trip operations counters
while in Status mode, press the
SELECT key until the
desired count appears. Figure 58 illustrates a typical trip
operations counter display. This example indicates that
there have been three long-time trips on this breaker since
the counter was last reset.
Figure 58. Trip Unit status display for long-time overcurrent trip
counter.
Clearing the Trip Operations Counters
Since the trip operations counters are stored in nonvolatile
memory, the Trip Unit maintains the information
indefinitely. To clear a particular counter, first display the
corresponding count, then hold down the
VALUE key and
press the SELECT key. The trip counter is reset to zero.