GE Industrial Solutions EVK011A0B Series (Eighth-Brick) - Manual

GE
Data Sheet
May 15, 2013 ©2012 General Electric Company. All rights reserved. Page 1
EVK011A0B Series (Eighth-Brick) DC-DC Converter Power Modules
36–60Vdc Input; 12.0Vdc Output; 11A Output Current
Features
 Compliant to RoHS II EU “Directive 2011/65/EU”
 Compliant to REACH Directive (EC) No 1907/2006
 Compatible in a Pb-free or SnPb reflow environment
 High efficiency – 95% at 12V full load
 Industry standard, DOSA compliant, Eighth brick footprint
57.9mm x 22.9mm x 8.95mm
(2.28in x 0.90in x 0.352in)
 Wide Input voltage range: 36-60 Vdc
 Tightly regulated output
 Constant switching frequency
 Positive Remote On/Off logic
 Input under/over voltage protection
 Output overcurrent/voltage protection
 Over-temperature protection
 Remote sense
 No minimum load required
 No reverse current during output shutdown
 Output Voltage adjust: 80% to 110% of V
o,nom
 Operating temperature range (-40°C to 85°C)
 UL* 60950-1Recognized, CSA † C22.2 No. 60950-1-03 Certified,
and VDE ‡ 0805:2001-12 (EN60950-1) Licensed
 CE mark meets 73/23/EEC and 96/68/EEC directives §
 Meets the voltage and current requirements for ETSI 300-132-
2 and complies with and licensed for Basic insulation rating
per EN60950-1
 2250 Vdc Isolation tested in compliance with IEEE 802.3 ¤ PoE
standards
 ISO ** 9001 and ISO 14001 certified manufacturing facilities
Applications
 Distributed Power Architectures
 Wireless Networks
 Access and Optical Network Equipment
 Enterprise Networks including Power over Ethernet
(PoE)
Options
 Negative Remote On/Off logic
 Over current/Over temperature/Over voltage
protections (Auto-restart)
* UL is a registered trademark of Underwriters Laboratories, Inc.
† CSA is a registered trademark of Canadian Standards Association.
‡ VDE is a trademark of Verband Deutscher Elektrotechniker e.V.
§ This product is intended for integration into end-user equipment . All of the required procedures of end-use equipment should be followed.
¤ IEEE and 802 are registered trademarks of the Institute of Electrical and Electronics Engineers, Incorporated.
** ISO is a registered trademark of the International Organization of Standards
RoHS Compliant