GE Industrial Solutions QS873A Thermal Probe Expansion Kit - Manual

Doc ID: CC848816991-MAN 1 OF 7 3/30/2010
Doc Type: General Manual 1:14:52 PM
Doc Issue: See change history above Lineage Power
Proprietary - Use Pursuant To Company Instructions
Title: CC848816991: Instructions for QS873A Thermal Probe Kit
(For use with Kit CC109124954: 3EM21044AA)
Change History:
Name: Date: Revision: Description Of Change
KAL 1/24/2007 2 FIX ERROR IN APPENDIX 1, STEPS 10, 12
KAL 3/16/2007 3 REPLACE 848719795 WITH CC848817024
Roy Davis 3/23/2007 4 UPDATE APPENDIX 1
HKS 2/5/2008 5 UPDATED FIGURE 3, UPDATED LOGO
GGL 3/30/2010 6 UPDATED FIGURES TO REFLECT RECENT ASSEMBLY CHANGE
Required Tools:
Wrench required to loosen/tighten hardware on battery posts. The size of this wrench is dictated by the batteries.
Procedure:
1. Verify all material is in kit.
Qty 1 108987611 QS873A Thermal Probe Assembly
Qty 1
CC848817024 Wireset Pre-attached to Thermal
Probe
Qty 1 402244081 Cable Tie (Attached)
2. Select the battery on which the probe is to be mounted. It is recommended that thermal probe be mounted as close to the
physical middle of the string as possible (example, Cell #3 of 4). See Figure 1.
FIGURE 1: Location of Thermal Probe on Battery String