GE Industrial Solutions QS873A Thermal Probe Expansion Kit User Manual
Page 5
Doc ID:
CC848816991-MAN
5 OF 7
3/30/2010
Doc Type:
General Manual
1:14:52 PM
Doc Issue:
See change history above
Lineage Power
Proprietary - Use Pursuant To Company Instructions
APPENDIX 1
Configuring System Controller for Specific Battery Type
1) When starting from the front panel default Float Voltage display screen, press MENU button
2) Press the down arrow five times to highlight the “Configuration” menu shown below
3) Press button to select “Configuration” and the following screen should appear
4) Press the down arrow three times to highlight the “Batteries” menu
5) Press button to select “Batteries” and a screen similar to that shown below appears
6) Press button to select the Battery “Type” and a screen similar to that below appears