GE Industrial Solutions IT Series 600-2000VA - Manual (Page 7)

Modifications Reserved 3
OPM_ITS_USM_M06_M20_0US_V011 (09/2007)
2.3 Transport / storage
• No liability can be accepted for any transport damage when the equipment is shipped in non-original packaging.
• Store the UPS in a dry location with the batteries in a fully charged state. Storage temperature must be within 5°F (-15 °C) to 113 °F (+45 °C).
CAUTION
In case of storage, pay attention to:
2.4 Warranty and RMA Process
GE Consumer & Industrial, operating through its authorized agents, warrants that the standard products will be free of defects in materials and
workmanship for a period of twenty-four (24) months after the date of shipment, or such other period as may be specified. Contact the GE
UPS Service Center for help at 800-637-1738 .
NOTE
This warranty does not cover failures of the product, which result from incorrect installation, misuse,
alterations by persons other than authorized agents, or abnormal operating conditions.
3 - Installation
3.1 Package contents
Inspect the package contents against the supplied packing slip. Inspect the UPS for damage after unpacking. If any damage is present please
immediately notify the carrier and place of purchase. Please save or recycle the packaging materials!
Shipping kit supplied with UPS:
• (1) USB COMMUNICATION CABLE
• (1) SERIAL COMMUNICATION CABLE
• (1) POWER CORD
• (1) RJ11 TELEPHONE CORD
• (1) CD SOFTWARE WITH IMBEDDED USER MANUAL
• (1) USER MANUAL
• (2) MOUNTING EAR BRACKET (19” RACK MOUNT UNITS ONLY)
WARNING In case of recognizable damage:
DO NOT connect any voltage to the unit
DO NOT put the unit into operation