GE Industrial Solutions 12A Digital PicoDLynx - Manual

GE
Data Sheet
November 19, 2013
©2013 General Electric Corporation.
All rights reserved.
12A Digital PicoDLynx TM : Non-Isolated DC-DC Power Modules
3Vdc –14.4Vdc input; 0.45Vdc to 5.5Vdc output; 12A Output Current
Features
 Compliant to RoHS II EU “Directive 2011/65/EU”
 Compatible in a Pb-free or SnPb reflow environment
 Compliant to IPC-9592 (September 2008), Category 2,
Class II
 DOSA based
 Wide Input voltage range (3Vdc-14.4Vdc)
 Output voltage programmable from 0.6Vdc to 5.5Vdc
via external resistor. Digitally adjustable down to
0.45Vdc
 Digital interface through the PMBus TM # protocol
 Tunable Loop TM to optimize dynamic output voltage
response
 Flexible output voltage sequencing EZ-SEQUENCE
 Power Good signal
 Fixed switching frequency with capability of external
synchronization
 Output overcurrent protection (non-latching)
 Overtemperature protection
 Remote On/Off
 Ability to sink and source current
 Cost efficient open frame design
 Small size: 12.2 mm x 12.2 mm x 8.5 mm
(0.48 in x 0.48 in x 0.335 in)
 Wide operating temperature range [-40°C to
105°C(Ruggedized: -D), 85°C(Regular)]
 UL* 60950-1Recognized, CSA † C22.2 No. 60950-1-03
Certified, and VDE ‡ 0805:2001-12 (EN60950-1) Licensed
 ISO** 9001 and ISO 14001 certified manufacturing
facilities
Applications
 Distributed power architectures
 Intermediate bus voltage applications
 Telecommunications equipment
 Servers and storage applications
 Networking equipment
 Industrial equipment
Description
The 12A Digital PicoDLynx TM power modules are non-isolated dc-dc converters that can deliver up to 12A of output current. These
modules operate over a wide range of input voltage (V
IN
= 3Vdc-14.4Vdc) and provide a precisely regulated output voltage from
0.45Vdc to 5.5Vdc, programmable via an external resistor and PMBus control. Features include a digital interface using the PMBus
protocol, remote On/Off, adjustable output voltage, over current and over temperature protection. The PMBus interface supports a
range of commands to both control and monitor the module. The module also includes the Tunable Loop
TM feature that allows the
user to optimize the dynamic response of the converter to match the load with reduced amount of output capacitance leading to
savings on cost and PWB area.
* UL is a registered trademark of Underwriters Laboratories, Inc.
† CSA is a registered trademark of Canadian Standards Association.
‡ VDE is a trademark of Verband Deutscher Elektrotechniker e.V.
** ISO is a registered trademark of the International Organization of Standards
# The PMBus name and logo are registered trademarks of the System Management Interface Forum (SMIF)
TRIM
VOUT
VS+
GND
RTUNE
CTUNE
RTrim
VIN
Co Cin
Vout+ Vin+
ON/OFF
SEQ
MODULE
PGOOD
SMBALRT#
SIG_GND
ADDR1
RADDR0
CLK
DATA
ADDR0
VS-
RADDR1
GND
SYNC
RoHS Compliant