GE Industrial Solutions ADVANCED SNMP WEB INTERFACE CARD User Manual
Page 14
Modifications reserved
Page 14/33
OPM_CNT_ADV_SNM_CRD_XGB_V050.doc
Operating Manual ADVANCED SNMP WEB INTERFACE CARD
C. sys-location
Syntax:
GE> C
Enter sys-location [The physical location of the agent]:
XXXXXXXXXXXXXXX
[Enter]
Default:
The physical location of the agent
Description:
The physical location of the agent
D. upsName
Syntax:
GE> D
Enter upsName [The administrative name of the connected UPS]:
XXXXXXXXXXXXXXX
[Enter]
Default:
The administrative name of the connected UPS
Description:
The administrative name of the connected UPS
E. upsAttachedDev
Syntax:
GE> E
Enter upsAttachedDev [The type of equipment connected to the UPS]:
XXXXXXXXXXXXXXX
[Enter]
Default:
The type of equipment connected to the UPS
Description: The type of equipment connected to the UPS
F. snmpport
Syntax:
GE> F
Enter snmp port [161]:
XXX
[Enter]
Default:
[161]
Description:
Specifies the SNMP plug in card’s UDP communication port number.
G. httpport
Syntax:
GE> G
Enter http port [80]:
XXX
[Enter]
Default:
[80]
Description:
Specifies the SNMP plug in card’s HTTP communication port number.
H. Telnet
server
Syntax:
GE> H
Telnet server (0=off 1=on) [1]:
X
[Enter]
Default:
1=on
Description:
Enables (on) or disables (off) configuration via telnet.
I. Http
server
Syntax:
GE> I
Http server (0=off 1=on) [1]:
X
[Enter]
Default:
1=on
Description:
Enables (on) or disables (off) configuration via web browser.
J. Telnet/Http
username
Syntax:
GE> J
Enter new username [GE]:
XXXXX
[Enter]
Default:
GE
Description:
Username for protects the SNMP card from unauthorised access via http or telnet session.