Technical data, Installation – Zanussi ZFC639WAP User Manual
Page 19
Problem
Possible cause
Solution
There is no voltage in the mains socket
(try to connect another appliance into
it).
Call an electrician.
Customer Service
If your appliance is still not working properly after making
the above checks, contact the nearest service centre.
To obtain fast service, it is essential that when you apply
for it you specify the model and serial number of your
appliance which can be found either on the guarantee
certificate or on the rating plate located on the external
right side of the appliance.
Replacing the lamp
1. Disconnect the mains plug from the mains socket.
2. Replace the lamp with one of the same power and
specifically designed for household appliances. (the
maximum power is shown on the lamp cover)
3. Connect the mains plug to the mains socket.
4. Open the lid. Make sure that the lamp comes on.
Technical data
Volume (gross)
Litre
404
Height
mm 876
Rising Time
hours
31
Volume (net)
Litre
400
Width
mm 1336
Energy Consumption
kWh/24h
0,879
Rated Power
Watt
105
Depth
mm 665
Freezing Capacity
kg/24h
19
Voltage
Volts
230
Weight
Kg
56
Climatic Class
SN-N-
ST-T
Further technical information are situated in the rating plate on the external right side of the appliance.
Installation
Positioning
Warning! If you are discarding an old appliance that
has a lock or catch on the lid, you must ensure that
it is made unusable to prevent young children being
trapped inside.
Important! The appliance shall have the plug accessible
after installation.
This appliance can be installed in a dry, well ventilated
indoor (garage or cellar), but for optimum performance
install this appliance at a location where the ambient tem-
perature corresponds to the climate class indicated on the
rating plate of the appliance:
Climate
class
Ambient temperature
SN
+10°C to + 32°C
N
+16°C to + 32°C
ST
+16°C to + 38°C
T
+16°C to + 43°C
19