Asus T4-P5945GCX - Manual (Page 68)

5-20 Chapter 5: BIOS setup
Execute Disable Function [Disabled]
Allows you to enable or disable the no execution on page protection technology.
When enabled, the system forces the XD features flag to always return to zero.
Configuration options: [Disabled] [Enabled]
CPU Internal Thermal Control [Auto]
When set to [Auto], the BIOS will automatically check the CPU’s capability to
enable the C1E support. In C1E mode, the CPU power consumption is lower when
idle. Configuration options: [Disabled] [Enabled]
5.4.3 Chipset
The Chipset menu allows you to change the advanced chipset settings. Select an
item then press <Enter> to display the sub-menu.
Advanced Chipset Settings
Configure DRAM Timing by SPD [Enabled]
Graphic Adapter Priority [PCI Express/Int-VGA]
Internal Graphics Mode Select [Enabled,8MB]
Configure DRAM Timing by SPD [Enabled]
Allows you to enable or disable configure DRAM timing by SPD.
Configuration options: [Disabled] [Enabled]
Booting Graphic Adapter Priority [PCI Express/Int-VGA]
Allows selection of the graphics controller to use as primary boot device.
Configuration options: [Internal VGA] [PCI Express/Int-VGA] [PCI Express/PCI]
[PCI/PCI Express] [PCI/Int-VGA]
Internal Graphics Mode Select [Enabled, 8MB]
Sets the internal graphics mode. Configuration options: [Disabled] [Enabled, 1MB]
[Enabled, 8MB]
Enable or disable
Configure DRAM Timing
by SPD