2 automatic switch off, 3 the heat setting, 4 automatic heat up – AEG HC451220EB User Manual

Page 25: 5 switching the power function on and off, 6 timer, The count down timer

Advertising
background image

4.2 Automatic Switch Off

The function deactivates the appliance
automatically if:
• All cooking zones are deactivated (

).

• You do not set the heat setting after

you activate the appliance.

• You spill something or put something

on the control panel for more than 10
seconds, (a pan, a cloth, etc.). An
acoustic signal sounds some time and
the appliance deactivates. Remove the
object or clean the control panel.

• The appliance becomes too hot (e.g.

when, a saucepan boils dry). Before
you use the appliance again, wait for
the cooking zone to cool down.

• You use incorrect cookware. The sym-

bol

comes on and the cooking

zone deactivates automatically after 2
minutes.

• You do not deactivate a cooking zone

or change the heat setting. After some
time

comes on and the appliance

deactivates. See below.

• The relation between heat setting and

times of the Automatic Switch Off
function:

,

-

— 6 hours

-

— 5 hours

-

— 4 hours

-

— 1.5 hours

4.3 The heat setting

Touch the control bar at the heat set-
ting. Move your finger along the control
bar to change the setting. Do not re-
lease before you have a correct heat set-
ting. The display shows the heat setting.

0

3 5

8 10

14 P

4.4 Automatic Heat Up

You can get a necessary heat setting in a
shorter time if you activate the Automat-
ic Heat Up function. This function sets
the highest heat setting for some time
(see the diagram), and then decreases to
the necessary heat setting.
To start the Automatic Heat Up function
for a cooking zone:

1.

Touch

(

comes on in the dis-

play).

2.

Immediately touch the necessary
heat setting. After 3 seconds
comes on in the display.

To stop the function change the heat
setting.

1

2

3

4

5

6

7

8

9

10

11

12

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14

4.5 Switching the Power
function on and off

The Power function makes more power
available to the induction cooking zones.
The Power function is activated for 10
minutes at most. After that the induction
cooking zone automatically switches
back to heat setting 14. To switch on,
touch

,

comes on. To switch off,

touch a heat setting

-

.

4.6 Timer

You can select the timer function with
.

The Count Down Timer

Use the Count Down Timer to set how
long the cooking zone operates for only
this one time. It deaktivates the cooking

ENGLISH

25

Advertising
This manual is related to the following products: