AEG HC451220EB - Manual (Page 26)

zone automatically after the time you
set.
The selection of Count Down
Timer function is possible when
the cooking zone is activated
and the heat setting is set.
When this function is activated,
comes on.
• To activate of the Count Down Tim-
er: touch of the timer to set the
time (
00
-
99
minutes). When the in-
dicator of the cooking zone starts to
flash slow, the time counts down.
• To see the remaining time: touch
again and again, until comes on.
The display shows the remaining time.
• To change the Count Down Tim-
er:touch again and again, until
comes on and then touch or .
• To deactivate the Count Down Tim-
er: touch again and again, until
comes on and then touch . The re-
maining time counts back to
00
.
When the timer countdown comes to
an end, the sound operates and
00
flashes. The cooking zone deactivates.
• To deactivate the sound: touch
The Count Up Timer
Use the Count Up Timer to monitor how
long the cooking zone operates.
• When this function is activated,
comes on.
• To activate the Count Up Timer:
Touch
The symbol goes out and comes
on.
• To see how long the cooking zone
operates: touch again and again,
until comes on. The display shows
the time that the zone operates.
• To deactivate the Count Up Timer:
touch again and again, until
comes on and touch . The symbol
goes out and comes on.
• To reset the Count Up Timer: touch
. The time counts back to
00
.
When the two Timer functions
operate at the same time, the
display shows the Count Up Tim-
er first.
The Minute Minder.
You can use the timer as a minute mind-
er while the cooking zones do not oper-
ate. Touch
Touch
or of the timer to set the
time. When the time comes to an end ,
the sound operates and
00
flashes.
• To stop the sound: touch
4.7 STOP+GO
The function sets all cooking zones
that operate to the lowest heat setting -
Keep Warm (
).
When operates, you cannot change
the heat setting.
The
function does not stop the timer
function.
• To activate this function touch
.
The symbol comes on.
• To deactivate this function touch
.
The heat setting that you set before
comes on.
4.8 Lock
You can lock the control panel, but not
. It prevents an accidental change of
the heat setting.
First set the heat setting.
To start this function touch
. The sym-
bol comes on for 4 seconds.
The Timer stays on.
To stop this function touch
. The heat
setting that you set before comes on.
When you stop the appliance, you also
stop this function.
4.9 The Child Safety Device
This function prevents an accidental op-
eration of the hob.
Starting the Child Safety Device
• Start the hob with .Do not set the
heat setting.
• Touch for 4 seconds. The symbol
comes on.
26 www.aeg.com