Care and cleaning – Zanussi ZDT16011FA User Manual

Page 23

Advertising
background image

2. Press the on/off button to activate the appli-

ance. Make sure that the appliance is in set-
ting mode.

3. Set the programme.

• The related programme indicator comes

on.

• The programme duration flashes in the

display.

4. Close the appliance door. The programme

starts.

• If you open the door, the display shows

the programme duration that decreases
with steps of 1 minute.

Starting a programme with delay start

1. Set the programme.

2. Press the delay button again and again until

the display shows the delay time you want
to set (from 1 to 24 hours).

• The delay time flashes in the display.

• The delay indicator is on.

3. Close the appliance door. The countdown

starts.

• If you open the door, the display shows

the countdown of the delay start that de-
creases with steps of 1 hours.

• When the countdown is completed, the pro-

gramme starts.

Opening the door while the appliance
operates

If you open the door, the appliance stops.
When you close the door, the appliance contin-
ues from the point of interruption.

Cancelling the delay start while the
countdown operates

Press and hold function buttons (B) and (C) at
the same time until:

• All the programme indicators come on.

When you cancel a delay start, the appli-
ance goes back to setting mode. You have

to set the programme again.

Cancelling the programme

Press and hold function buttons (B) and (C) at
the same time until:

• All the programme indicators come on.

Make sure that there is detergent in the
detergent dispenser before you start a

new programme.

At the end of the programme

When the programme is completed, an inter-
mittent acoustic signal operates and the display
shows 0.

1. Press the on/off button to deactivate the

appliance.

2. Close the water tap.

If you do not press the on/off button, the
AUTO OFF device automatically deacti-

vates the appliance after some minutes. This
helps to decrease the energy consumption.

• Let the dishes become cold before you

remove them from the appliance. Hot
dishes can be easily damaged.

• First remove the items from the lower

basket, then from the upper basket.

• There can be water on the sides and on

the door of the appliance. Stainless
steel becomes cool more quickly than
the dishes.

Care and cleaning

Warning! Before maintenance, deactivate
the appliance and disconnect the mains

plug from the mains socket.

Dirty filters and clogged spray arms de-
crease the washing results.

Make a check regularly and, if necessary, clean
them.

23

www.zanussi.com

Advertising