Voltage selector – Asus V3-P5G965 User Manual

Page 16

Advertising
background image

1-6

Chapter 1: System introduction

Voltage selector

The system’s power supply unit has a 115 V/230 V voltage selector

switch located beside the power connector. Use this switch to select the

appropriate system input voltage according to the voltage supply in your

area.
If the voltage supply in your area is 100-127 V, set this switch to 115 V.
If the voltage supply in your area is 200-240 V, set this switch to 230 V.

Setting the switch to 115V in a 230V environment or 230V in a 115V

environment will seriously damage the system!

115V/230V

Voltage selector

15. Power supply unit fan vent. This vent is for the PSU fan that provides

ventilation inside the power supply unit.

16. Chassis fan vent. This vent is for the fan that provides ventilation

inside the system chassis.

17. IEEE 1394 port. This 6-pin IEEE 1394 port provides high-speed

connectivity for audio/video devices, storage peripherals, PCs, or

portable devices.

18. LAN (RJ-45) port. Supported by Realtek® Gigabit LAN controller,

this port allows Gigabit connection to a Local Area Network (LAN)

through a network hub. Refer to the table below for the LAN port LED

indications.

19. Cover screw. Remove the cover screws on the rear panel when

installing expansion cards.

20. Expansion slot metal brackets. Remove these brackets when installing

expansion cards.

Advertising
This manual is related to the following products: