Asus V3-P5G965 - Manual (Page 87)

5-23 ASUS V-Series P5G965
Memory Remapping Feature [Disabled]
Allows you to enable or disable the remapping of the overlapped PCI memory
above the total physical memory. Enable this option only when you install 64-
bit operating system.
Configuration options: [Disabled] [Enabled]
Configure DRAM Timing by SPD [Enabled]
When this item is enabled, the DRAM timing parameters are set according to
the DRAM SPD (Serial Presence Detect). When disabled, you can manually set
the DRAM timing parameters through the DRAM sub-items.
Configuration options: [Enabled] [Disabled]
Initiate Graphic Adapter [PEG/PCI]
Allows you to select the graphics controller as the primary boot device.
Configuration options: [IGD] [PCI/IGD] [PCI/PEG] [PEG/IGD] [PEG/PCI]
Initiate Graphic Mode Select [Enabled, 8MB]
Allows you to select the amount of system memory used by the Internal
graphics device. Configuration options: [Disabled] [Enabled,1MB] [Enabled,
8MB]
• The option of “Maximum DVMT” is for “DVMT Mode” only.
DVMT Mode Select [Fixed Mode]
Allows you to select the DVMT mode.
Configuration options: [Fixed Mode] [DVMT Mode]
DVMT/FIXED Memory [128MB]
Allows you to select the DVMT/FIXED graphic memory size.
Configuration options: [128MB] [256MB] [Maximum DVMT]
PEG Force x1 [Disabled]
Configuration options: [Enabled] [Disabled]