Asus V3-P5G965 - Manual (Page 25)

2-7 ASUS V-Series P5G965
If you purchased a separate CPU heatsink and fan assembly, make
sure that the Thermal Interface Material is properly applied to the CPU
heatsink or CPU before you install the heatsink and fan assembly.
To install the CPU heatsink and fan:
1. Place the heatsink on top of the
installed CPU, making sure that
the four fasteners match the
holes on the motherboard.
3. When the fan and heatsink assembly is in place, connect the CPU fan
cable to the connector on the motherboard.
A B
B
2. Push down two fasteners at
a time in a diagonal sequence
to secure the heatsink and fan
assembly in place.
Do not forget to connect the CPU fan connector! Hardware monitoring
errors can occur if you fail to plug this connector.
A
A
B
B
1
1
A
R
P5B-VM
CPU Fan Connector
CPU_FAN
GND CPU F
AN PWR
CPU F
AN IN
CPU F
AN PWM