Asus Pundit-R - Manual (Page 24)

24 Chapter 2: Basic installation
2.5.3 Re-installing the CPU fan and
heatsink assembly
To re-install the CPU fan and heatsink assembly:
4
1. Position the CPU fan and
heatsink assembly on top of the
installed CPU.
1
2
3
2. Align the retention bracket with
the rails on the side of the CPU
fan.
3. Attach the retention bracket
hook in the retention module
hole.
4. Carefully press down the
retention bracket locking lever
until its hook attaches to the
retention module hole.
5. Follow steps 2-4 to re-install the
second retention bracket.
6. Connect the CPU fan cable to
the CPU fan connector on the
motherboard.