Asus Pundit-R - Manual (Page 81)

81 ASUS AB-P2800 book size barebone system
CardBus [Enabled]
Allows you to enable or disable the onboard PCMCIA card reader.
Configuration options: [Enabled] [Disabled]
VIA 1394 [Enabled]
Allows you to enable or disable the onboard 1394 controller.
Configuration options: [Enabled] [Enabled]
Serial Port1 Address [3F8/IRQ4]
Allows you to select the Serial Port1 base address.
Configuration options: [Disabled] [3F8/IRQ4] [2F8/IRQ3] [3E8/IRQ4]
[2E8/IRQ3]
5.4.3 Onboard Devices Configuration
PCI CardBus Enabled or
Disabled. CardBus [Enabled]
VIA 1394 [Enabled]
Serial Port1 Address [3F8/IRQ4]
Parallel Port Address [378]
Parallel Port Mode [EPP+ECP]
EPP Version [1.9]
ECP Mode DMA Channel [DMA3]
Parallel Port IRQ [IRQ7]
USB 1.1 OHCI Controllers [Enabled]
This option allows you to enable or disable the USB 1.1 OHCI controller.
Configuration options: [Disabled] [Enabled]
USB 2.0 EHCI Controller [Enabled]
This option allows you to enable or disable the USB 2.0 EHCI controller.
Configuration options: [Enabled] [Disabled]
Legacy USB Support [Auto]
Allows you to enable or disable support for legacy USB devices. Setting to
[Auto] allows the system to detect the presence of USB devices at startup.
If a legacy USB device is detected, the legacy USB support is enabled. If
none, the legacy USB support is disabled.
Configuration options: [Disabled] [Enabled] [Auto]