Asus Terminator K7 - Manual (Page 22)

22 Chapter 2: Basic Installation
2.5 Install a Hard Disk Drive
The chassis has one 3.5-inch hard disk drive (HDD) bay right under
the 5.25-inch bay. The following figures show the internal and external
views of the HDD bay location.
Follow these steps to install an
IDE HDD.
1. Place the chassis upright.
3. Carefully push the HDD into
the bay until its screw holes
align with the holes on the bay.
4. Secure the HDD with three
screws on each side of the
bay.
2. Carefully insert the HDD into
the 3.5-inch bay.
HDD right side up
5.25-inch Drive Bay
3.5-inch HDD Drive Bay
Internal View External View
HDD Screw holes