Asus Terminator K7 - Manual (Page 88)

88 Chapter 5: BIOS Information
Halt On [All but Keyboard]
This field determines which types of errors will cause the system to halt.
Configuration options: [All Errors] [No Error] [All but Keyboard] [All but Disk]
[All but Disk/Keyboard]
Installed Memory [XXX MB]
This display-only field displays the amount of conventional memory detected
by the system during bootup. You do not need to make changes to this field.
Supervisor Password [Disabled] / User Password [Disabled]
These fields allow you to set the passwords. To set the password, highlight the
appropriate field and press <Enter>. Type in a password and press <Enter>.
You can type up to eight alphanumeric characters. Symbols and other keys
are ignored. To confirm the password, type the password again and press the
<Enter>. The password is now set to [Enabled]. This password allows full
access to the BIOS Setup menus. To clear the password, highlight this field
and press <Enter>. The same dialog box as above will appear. Press <Enter>
and the password will be set to [Disabled].
A Note about Passwords
The BIOS Setup program allows you to specify passwords in the Main menu. The
passwords control access to the BIOS during system startup. The passwords are
not case sensitive. In other words, it makes no difference whether you enter a
password using upper or lowercase letters. The BIOS Setup program allows you
to specify two separate passwords: a Supervisor password and a User pass-
word. When disabled, anyone may access all BIOS Setup program functions.
When enabled, the Supervisor password is required for entering the BIOS Setup
program and having full access to all configuration fields.
Forgot the Password?
If you forgot the password, you can clear the password by erasing the CMOS Real
Time Clock (RTC) RAM. The RAM data containing the password information is
powered by the onboard button cell battery. To erase the RTC RAM: (1) Unplug
your computer, (2) Short the solder points, (3) Turn ON your computer, (4) Hold
down <Delete> during bootup and enter BIOS setup to re-enter user preferences.
A7VC
®
A7VC Clear RTC RAM
Short solder points
to Clear CMOS
CLRTC (R155)