Asus Terminator P4 533A User Manual
Page 37
ASUS Terminator P4 533A Barebone System
37
ATX 12V connector. This power connector connects the 4-pin 12V
plug from the ATX 12V power supply.
Super I/O chipset. This Low Pin Count (LPC) interface provides
the commonly used Super I/O functionality. The chipset supports a
high-performance floppy disk controller for a 360K/720K/1.44M/
2.88M floppy disk drive, a multi-mode parallel port, two standard
compatible UARTs, a Standard Infrared (SIR), one MPU-401 UART
mode compatible MIDI/game port, and a Flash ROM interface.
Flash ROM. This 2Mb firmware contains the programmable BIOS
program.
CPU socket. A 478-pin surface mount, Zero Insertion Force (ZIF)
socket for the Intel
®
Pentium
®
4 478/Northwood Processor with
533/400 MHz system bus that allows 4.3GB/s and 3.2GB/s data
transfer rates, respectively.
DDR DIMM sockets. These two 184-pin DIMM sockets support up
to 2GB using unbuffered ECC or non-ECC PC2700/2100/1600
DDR DIMMs.
Floppy disk connector. This connector connects the provided
ribbon cable for the floppy disk drive. One side of the connector is
slotted to prevent incorrect insertion of the floppy disk cable.
ATX power connector. This 20-pin connector connects to an ATX
12V power supply. The power supply must have at least 1A on the
+5V standby lead (+5VSB).
North bridge controller. This SiS651 controller integrates a high
performance host interface for the Intel
®
Pentium
®
4 processor, a
memory controller, an AGP interface, and SiS MuTIOL technology.
IDE connectors. These dual-channel bus master IDE connectors
support up to four Ultra DMA133/100/66, PIO Modes 3 & 4 IDE
devices. Both the primary (blue) and secondary (black) connectors
are slotted to prevent incorrect insertion of the IDE ribbon cable.
South bridge controller. Referred to as the SiS962L MuTIOL
Media I/O, this controller integrates the audio controller with AC’97
Interface, Ethernet MAC, Dual Universal Serial Bus Host
controllers, IDE Master/Slave controllers, and the MuTIOL Connect
to PCI Bridge.
10
1
2
3
4
5
6
7
8
9