Asus AAM6020VI-T4 - Manual (Page 23)

AAM6020VI-T4 User Manual
23 23
4.6.1 UPnP
UPnP NAT and Firewall Traversal allow traffic to pass-thru the router for applications using the UPnP
protocol. This feature requires one active DSL connection. In presence of multiple DSL connections, select
the one over which the incoming traffic will be present, for example the default Internet connection.
To enable UPnP, you must first have a WAN connection configured. Once a WAN connection is
configured, from the Home screen, click Advanced and under Advanced, select UPnP. This will bring up
the screen shown in Figure 12. You must enable UPnP and then select which connection will utilize
UPnP. In this case the connection name “NEW” is enabled.
Figure 12 UPnP
The apply button will temporarily save this connection. To make the change permanent you need to click
on Tools (at the top of the page) and select System Commands. At the system commands page, click on
Save All.