Asus AAM6020VI-T4 - Manual (Page 4)

AAM6020VI-T4 User Manual
4 4
1. Introduction
Congratulations on becoming the owner of an ASUS AAM6020VI-T4 CPE (Customer Premises
Equipment). Your LAN (Local Area Network) will now be able to access the Internet via the CPE’s ADSL
connection.
This User Manual will show you how to set up the AAM6020VI-T4 CPE, and how to customize its
configuration to get the most out of this product.
1.1
Features & System Requirements
Features
• Equipped with a 4 Port 10/100 Ethernet
• Connects multiple PCs to the Internet with just one WAN IP Address (when configured in router
mode with NAT enabled)
• Configurable through user-friendly web pages
• Supports Single-Session IPSec and PPTP Pass-Through for Virtual Private Network (VPN)
• Several popular games are already pre configured. Just enable the game and the port settings are
automatically configured.
• Configurable as a DHCP Server on Your Network
• Compatible with virtually all standard Internet applications
• Industry standard and interoperable DSL interface
• Simple web based status page displays a snapshot of your system configuration, and links to the
configuration pages
• Downloadable flash software upgrades
• Support for up to 8 Permanent Virtual Circuits (PVC)
• Support for up to 8 PPPOE sessions
• Layer 2 Ethernet switch (not a hub)
• PVC assignment must be operational in bridged mode (RFC 1483/2684)
System Requirements
In order to use the AAM6020VI-T4 CPE for Internet access, you must have the following:
ADSL service subscription from your ISP.
One computer containing an Ethernet 10BaseT/100BaseT network interface card (NIC).
(Optional) An Ethernet hub/switch, if you are connecting the device to several computers on an
Ethernet network.
For system monitoring or configuration using the supplied web-based program: a web browser such as
Internet Explorer Version 5.5 or later.