Asus T2-PH1 - Manual (Page 102)

5 - 3 0 5 - 3 0 5 - 3 0 5 - 3 0 5 - 3 0 C h a p t e r 5 : B I O S s e t u p C h a p t e r 5 : B I O S s e t u p C h a p t e r 5 : B I O S s e t u p C h a p t e r 5 : B I O S s e t u p C h a p t e r 5 : B I O S s e t u p
5.5.5 5.5.5 5.5.5 5.5.5 5.5.5 APM Configuration APM Configuration APM Configuration APM Configuration APM Configuration
APM Configuration
Restore on AC Power Loss [Power Off]
Power On By PS/2 Keyboard [Disabled]
Power On By PS/2 Mouse [Disabled]
Power On By PCI/PCIE Devices [Disabled]
Power On By External Modems [Disabled]
Power On By RTC Alarm [Disabled]
Restore on AC Power Loss [Power Off] Restore on AC Power Loss [Power Off] Restore on AC Power Loss [Power Off] Restore on AC Power Loss [Power Off] Restore on AC Power Loss [Power Off]
When set to Power Off, the system goes into off state after an AC power
loss. When set to Power On, the system goes on after an AC power loss.
When set to Last State, the system goes into either off or on state,
whatever the system state was before the AC power loss.
Configuration options: [Power Off] [Power On] [Last State]
Power On By PS/2 Keyboard [Disabled] Power On By PS/2 Keyboard [Disabled] Power On By PS/2 Keyboard [Disabled] Power On By PS/2 Keyboard [Disabled] Power On By PS/2 Keyboard [Disabled]
Allows you to use specific keys on the keyboard to turn on the system.
This feature requires an ATX power supply that provides at least 1A on the
+5VSB lead. Configuration options: [Disabled] [Enabled]
Power On By PS/2 Mouse [Disabled] Power On By PS/2 Mouse [Disabled] Power On By PS/2 Mouse [Disabled] Power On By PS/2 Mouse [Disabled] Power On By PS/2 Mouse [Disabled]
When set to [Enabled], this parameter allows you to use the PS/2 mouse
to turn on the system. This feature requires an ATX power supply that
provides at least 1A on the +5VSB lead. Configuration options: [Disabled]
[Enabled]
Power On By PCI/PCIE Devices [Disabled] Power On By PCI/PCIE Devices [Disabled] Power On By PCI/PCIE Devices [Disabled] Power On By PCI/PCIE Devices [Disabled] Power On By PCI/PCIE Devices [Disabled]
When set to [Enabled], this parameter allows you to turn on the system
through a PCI LAN, modem card, or PCI Express device. This feature
requires an ATX power supply that provides at least 1A on the +5VSB lead.
Configuration options: [Disabled] [Enabled]
Go into On/Off or
Suspend when Power
button is pressed.