Asus T2-PH1 - Manual (Page 96)

5 - 2 4 5 - 2 4 5 - 2 4 5 - 2 4 5 - 2 4 C h a p t e r 5 : B I O S s e t u p C h a p t e r 5 : B I O S s e t u p C h a p t e r 5 : B I O S s e t u p C h a p t e r 5 : B I O S s e t u p C h a p t e r 5 : B I O S s e t u p
PEG Buffer Length [Auto] PEG Buffer Length [Auto] PEG Buffer Length [Auto] PEG Buffer Length [Auto] PEG Buffer Length [Auto]
Sets the PCI Express Graphics card buffer length.
Configuration options: [Auto] [Long] [Short]
The above item appears only when the P E G P o r t P E G P o r t P E G P o r t P E G P o r t P E G P o r t item is set to
Enabled.
Graphic Adapter Priority [PCI-Express/Int-VGA] Graphic Adapter Priority [PCI-Express/Int-VGA] Graphic Adapter Priority [PCI-Express/Int-VGA] Graphic Adapter Priority [PCI-Express/Int-VGA] Graphic Adapter Priority [PCI-Express/Int-VGA]
Allows selection of the graphics controller to use as a primary boot device.
Configuration options: [Internal VGA] [PCI Express/Int-VGA] [PCI Express/
PCI] [PCI/PCI Express] [PCI/Int-VGA]
Internal Graphics Mode Select [Enabled, 8MB] Internal Graphics Mode Select [Enabled, 8MB] Internal Graphics Mode Select [Enabled, 8MB] Internal Graphics Mode Select [Enabled, 8MB] Internal Graphics Mode Select [Enabled, 8MB]
Allows selection of the amount of system memory pre-allocated by the
internal graphics device. Configuration options: [Disabled] [Enabled, 1MB]
[Enabled, 4 MB] [Enabled, 8 MB] [Enabled, 16 MB] [Enabled, 32 MB]
Fixed Graphic Memory Size [32 MB]
Allows selection of the size of graphic memory used by fixed mode.
Configuration options: [0 MB] [32 MB] [64 MB] [128 MB]
DVMT Graphic Memory Size [32 MB]
Allows selection of the size of graphic memory used by DVMT mode.
Configuration options: [0 MB] [32 MB] [64 MB] [128 MB] [224 MB]
PEG Port [Enabled] PEG Port [Enabled] PEG Port [Enabled] PEG Port [Enabled] PEG Port [Enabled]
Enables or disables the PCI Express Graphics port.
Configuration options: [Disabled] [Enabled]
PEG Force x 1 [Disabled]
Enables or disables the PCI Express Graphics force x1.
Configuration options: [Disabled] [Enabled]