Armasight ANKI000049 AIM PRO-L Advanced Integrated Mount - Manual (Page 23)

23
5. Verify that the clamping device is firmly secured to the NVM. If necessary,
adjust the clamping device as per Part 3.1.6 (Clamping Device Adjust-
ment).
B. Mounting PVS-14/6015 Night Vision Monocular to the AIM-PRO
The NVM can be mounted to the AIM-PRO using an optional bracket. For
instructions on how to position the AIM-PRO collimator, see Part 3.1.2 (Col-
limator Installation).
A
B
C
D
FIGURE 3-5. MOUNTING AN OPTIONAL BRACKET TO THE PVS-14/6015 NV MONOCULAR
Mount the NVM to the AIM-PRO bracket as follows (Refer to Figure 3-5):
1. Loosen the bracket clamp screw (A).
2. Place the bracket clamp (B) onto the infinity focusing stop ring (D) of the
NVM objective lens.
3. Secure the NVM to the bracket clamp (B) by tightening the screw (A).
FIGURE 3-6. AIM-PRO ASSEMBLED WITH THE PVS-14/6015 NV MONOCULAR