Controls – Armasight ANKI000049 AIM PRO-L Advanced Integrated Mount User Manual
Page 27
27
NOTE:
The eight-sided nuts of the AIM-PRO clamping devices will only fit in
their holes if turned in increments equal to 360°/8.
4. Verify that the clamping device is firmly secured to the weapon/ NVM
rail.
3.2. CONTROLS
CAUTION:
DO NOT over-adjust or force the AIM-PRO controls past their stopping
points.
CAUTION:
To avoid damage to the intensifier tube, DO NOT turn on “DAY” mode if
using the AIM-PRO in conjunction with a night vision monocular.
The AIM-PRO controls described elsewhere in this manual (adjustment
screws; clamping device levers and nuts) are omitted in this section. The
AIM-PRO controls are shown in Figure 3-11, and are defined in Tables 3-1.
The ITEM NO. columns of the tables indicate the number used to identify
items in the figures.
2
FIGURE 3-11. AIM-PRO CONTROLS
3
1