AVSL 153.770 ILA2 - Manual (Page 3)

ILC4 and ILA4
IN-LINE CONTROLLER AND
AMPLIFIER FOR RGB LED TAPE
Item ref: 153.702UK, 153.771UK,
153.701UK
User Manual
WARNING: These products are intended for professional installation of RGB LED tape and
should be connected by qualified personnel in accordance with electrical safety standards.
Ensure that the rated load indicated is not exceeded.
Installation
The ILC4 controller can be employed to control Fluxia RGB LED tape operating from a 5-24Vdc
power supply. Maximum short term current load is rated at 3 x 4A. For constant full power
output, it is advised to limit this to 3 x 2A load.
There are 2 versions of Fluxia RGB LED tape - 153.720UK has 60 LEDs per metre and
153.721UK has 30 LEDs per metre. It is recommended that each controller is connected to no
more than 300 RGB LEDs (i.e 1 x 5m roll of 153.720UK or 2 x rolls of 153.721UK connected in
parallel).
For longer runs, each subsequent roll should be linked on using the ILA4 amplifier.
The ILA4 also accepts 5-24Vdc and connects from the end of a controlled length of RGB LED
tape to the beginning of the next length of RGB LED tape to match the patterns/colours of the
first tape. (also 3 x 4A peak, 3 x 2A continuous output)
Connection is via a 4-pin coupler, as supplied with Fluxia RGB LED tape.
Ensure that the red triangle is connected to “+” or “Common” on the LED tape.