AVSL 154.095 DM-X24 - Manual (Page 11)

10/19 USER MANUAL
1)Enter the EDIT mode.
2)Tap the Step button to scroll to the step you wish to delete
3)Tap the Delete button when you reach the step. You wish to delete.
4)Repeat step 2 and 3 all of the unwanted steps have been deleted.
5)Press and hold the Record REC Exit button. The Scene button LED will turn off, indicating that
the Edit mode has been exited.
DELETE A STEP OR STEPS
INSERT STEP OR STEPS
MODIFY A STEP OR STEPS
Action
Action
Action
1)Record a scene or scenes you wish to insert.
2)Be sure you are in Chase Scene and enter the EDIT mode.
3)Tap the Step button to scroll to the step which you wish to insert the step before. You may read
the step from display.
4)Tap th Insert button to insert the step you have created before.
5)Exit Edit mode.
NOTES :Part of entering the Edit mode is .selecting scene you wish to edit. See section on Edit
enable for further instruction.
AII LEDS will flash to indicating a successfully Insert of the step.
1)Enter EDIT mode.
3)Tap the Step button to scroll to the step which you wish to insert the step before. You may
read the step from display.
4)While holding the UP or DOWN button, tap the Flash button corresponding to the DMX channel
of the Scene you wish to modify until you reach the desired intensity value read from the display.
Then, you may tap the Flash buttons until you are satisfied with the new Scene.
5)Repeat step2,3,and 4 until all the steps have been modified.
6)Exit EDIT mode.
NOTES: Part of entering the Edit mode is selecting which scene you wish to Edit. See section on
enable for further instructions.
ALL LEDS will flash to indicate a successful insert of the step.
3) If you are not satisfied with the scene, you may press and hold the Record button &
tap the Page/REC CLR button. All LEDs will flash, indicating the scenes have been cleared.
Notes
All scenes stored in the temporary memory of the controller will be erased by this process.
This process will not affect the scenes already programmed into a Scene fader.
DMX 512 CONTROLLER SERIES