AVSL 154.095 DM-X24 - Manual (Page 14)

13/19 USER MANUAL
Setting MIDI IN
Action
1) While holding down the RECORD button, simultaneously tap to Flash button #1 three times. The
display reads MIDI CHANNEL IN to indicate channel setup is available.
2) Select the MIDI control channel (1-16)by tapping Flash button 1-16.The relevant channel LED
lights indicating MIDI IN channel is est.
3) While holding down RECORD, tap the REC EXIT button to exit MIDI setting.
Notes: This is the Channel that the controller will receive MIDI note commands.
Notes: When working with MIDI notes 22-93,you may simulate a faders incease
and decrease by adjusting the velocity of the note.
4) While holding down the RECORD button, simultaneously tap Flash button #2 three times. The
display reads MIDI CHANNEL OUT to indicate channel setup is available.
5) Select the MIDI control channel (1-16)by tapping Flash button 1-16.The relevant lights indicating
MIDI OUT channel is set.
6) While holding down RECORD, tap the REC EXIT Button to exit MIDI setting.
Notes: This is the channel that the controller will transmit MIDI note commands.
Setting MIDI OUT
Action
Receiving MIDI File Dump
Action
7) While holding down the RECORD button, simultaneously Flash button #3 three times. The
display reads MIDI FILEDUMP RECVING 000%wen the device is in the correct mode.
MIDI Note
27-69
70-93
94
95
96
97
98
99
100
101
102
Tum on or off program 1-48
Activate Channel 1-24
FULL-ON
DARK(momentary blackout)
HOLD
Tum on or off AUDIO
Chase SCENE
MODE:1-12A-1-12B
MODE:1-24A
Step
BACKOUT
FUNCTION (TURN ON/OFF)
DMX 512 CONTROLLER SERIES