Т³гж 14 – AVSL 154.092 DM-X12 User Manual
Page 14
3.4
Chase Programming
3.4
Chase Programming
Action :
Action :
2)
Adjust the Chase speed by tapping the TAP DISPLAY
button twice at a rate of your choosing.
1) Press a CHASE button then press the AUTO DEL
button.
Notes :
Notes :
The time between 2 taps will set the chase speed (up
to 10 minutes)
3.4.1
CREATE A CHASE
3.4.1
CREATE A CHASE
Action :
Action :
2)
Press the CHASE (1~6) button you wish to program.
1)
Press the PROGRAM button until the LED blinks.
3)
Change BANK if necessary to locate a scene.
Notes :
Notes :
3.4.2
RUNNING A CHASE
3.4.2
RUNNING A CHASE
Action :
Action :
2)
Press the desired CHASE button.
1) Press and hold the PROGRAM button to enter
programming mode.
3)
Select the BANK to be copied using the
BANK UP/DOWN buttons.
Notes :
Notes :
4)
Press MUSIC/BANK COPY button to prepare copy.
3.4.4
EDIT CHASE (COPY BANK INTO CHASE)
3.4.4
EDIT CHASE (COPY BANK INTO CHASE)
5)
Press MIDI/REC button to copy the bank. All LEDs
will blink.
A chase is created by using previously created scenes. Scenes become steps in a chase and can be
arranged in any order you choose. It is highly recommended that prior to programming chases for the
first time; you delete all chases from memory. See Delete
All
Chases
for instructions.
A Chase can contain 240 scenes as steps. The term steps and scenes are used interchangeably.
4)
Select the SCENE to insert.
5)
Tap the MIDI/REC button to store.
6)
Repeat steps 3 ~ 5 to add additional steps in the
chase. Up to 240 steps can be recorded.
7)
Press and hold the PROGRAM button to save the
chase.
Action :
Action :
2)
Select the desired CHASE button.
1) Press and hold the PROGRAM button until the LED
is lit.
Notes :
Notes :
3.4.3
CHECKING A CHASE
3.4.3
CHECKING A CHASE
3)
Press the TAP DISPLAY button to switch the LCD
display to steps.
4)
Review each scene/step individually by using the
BANK UP/DOWN buttons.
13/20
DMX 512 CONTROLLER SERIES
USER MANUAL