AVSL 154.092 DM-X12 - Manual (Page 17)

3.5.3 DELETE A SCENE 3.5.3 DELETE A SCENE
Action : Action :
2) Turn the controller back on.
1) Press and hold the PROGRAM button and the
BANK DOWN button while turning off power to
the controller.
Notes : Notes :
CAUTION!
This process is irreversible. All scenes with data will
be set to 0.
Action : Action :
2) Select the BANK that contains the scene to be
deleted by using the BANK UP/DOWN buttons.
1) Press and hold the PROGRAM button to enter
programming mode.
3) Press and hold the AUTO DEL button.
Notes : Notes :
Action : Action :
2) Select the program BANK to run in soundactive
mode using the BANK UP/DOWN buttons.
1) Press the MUSIC BANK COPY button until the
MUSIC LED turns on.
Notes : Notes :
3.6 Playback 3.6 Playback
4) You can adjust the duration time using the
FADE TIME fader.
3.5.4 DELETE ALL SCENES 3.5.4 DELETE ALL SCENES
4) Press the SCENE button that corresponds to the
scene you want to delete. All LEDs will blink.
When deleting a scene the physical location is not
removed, however, all 192 DMX channels available
to the scene will be set to value 0.
3.6.1 RUNNING IN SOUND-MODE 3.6.1 RUNNING IN SOUND-MODE
3) Alternatively you can press a single CHASE button
(1~6) or several CHASE buttons in sequence and all
selected chases will loop in the order selected.
In the Sound mode, programs will be triggered by the
sound using its built-in microphone.
Multiple chases selected will loop and run in the
order originally selected.
Action : Action :
2) If a CHASE button is not pressed the controller
will automatically run a BANK program.
1) Press the AUTO DEL button until the AUTO LED
turns on.
Notes : Notes :
4) Alternatively you can press a single CHASE button
(1~6) or several CHASE buttons in sequence and all
selected chases will loop in the order selected.
3.6.2 RUNNING IN AUTO-MODE 3.6.2 RUNNING IN AUTO-MODE
3) Change BANK programs by using BANK UP/DOWN
buttons.
In the Auto mode, programs will be triggered by
controllers fade and speed time as set on the faders.
Multiple chases selected will loop and run in the
order originally selected.
5) You can adjust the time between steps by moving the
SPEED fader and the duration of the step by moving
the FADE TIME fader.
Action : Action :
2) While holding down AUTO DEL, in succession
press and release each CHASE you would like
to run simultaneously.
1) Press and hold AUTO DEL button.
Notes : Notes :
3.6.3 RUN MULTIPLE CHASES SIMULTANEOUSLY 3.6.3 RUN MULTIPLE CHASES SIMULTANEOUSLY
IMPORTANT! To avoid conflict between scenes
running simultaneously that control the same fixture
attributes consider creating individual color and gobo
chases.
16/20
DMX 512 CONTROLLER SERIES
USER MANUAL