AVSL 154.092 DM-X12 - Manual (Page 15)

3.4.5 EDIT CHASE (COPY SCENE INTO CHASE) 3.4.5 EDIT CHASE (COPY SCENE INTO CHASE)
Action : Action :
2) Press the desired CHASE button.
1) Press and hold the PROGRAM button to enter
programming mode.
Notes : Notes :
I .e. To insert a scene between Steps 05 and 06
navigate using BANK buttons until the display reads
STEP05.
Action : Action :
2) Press the desired CHASE button.
1) Press and hold the PROGRAM button to enter
programming mode.
3) Select the BANK that contains the scene to be copied
using the BANK UP/DOWN buttons.
Notes : Notes :
3.4.6 EDIT CHASE (INSERT SCENE INTO A CHASE) 3.4.6 EDIT CHASE (INSERT SCENE INTO A CHASE)
Action : Action :
2) Press the desired CHASE button that contains
the scene to be deleted.
1) Press and hold the PROGRAM button to enter
programming mode.
3) Press the TAP DISPLAY button to switch the LCD
display to steps.
Notes : Notes :
3.4.7 DELETE A SCENE IN A CHASE 3.4.7 DELETE A SCENE IN A CHASE
5) Press AUTO DEL button to delete the step/scene.
All LEDs will blink.
4) Press the SCENE button that corresponds to the
scene to be copied.
5) Press MIDI/REC button to copy the scene.
All LEDs will blink.
3) Press the TAP DISPLAY to switch the LCD display
to steps view.
4) Use the BANK UP/DOWN buttons to navigate steps
and locate the insert point of the new scene.
The display will read the step number.
5) Press MIDI/REC button to prepare the insert.
6) Use the BANK UP/DOWN button to locate the SCENE.
7) Press the SCENE button that corresponds to the scene
to be inserted.
8) Press MIDI/REC button to insert the scene. All LEDs
will blink.
4) Select the scene/step to be deleted using the
BANK UP/DOWN buttons.
Action : Action :
2) Press the CHASE button (1~6) to be deleted.
1) Press and hold the PROGRAM button to enter
programming mode.
3) Press and hold AUTO DEL button and the respective
CHASE button to delete the chase. All LEDs will blink.
Notes : Notes :
3.4.8 DELETE A CHASE 3.4.8 DELETE A CHASE
14/20
DMX 512 CONTROLLER SERIES
USER MANUAL