AVSL 154.092 DM-X12 - Manual (Page 18)

3.6.4 BLACKOUT 3.6.4 BLACKOUT
Action : Action :
2) Select the MIDI control channel (1~16) via the
BANK UP/DOWN buttons to set.
1)Press and hold the MIDI/REC button for about 3 seconds.
Notes : Notes :
This is the Channel that the controller will receive
MIDI note commands.
Action : Action :
2) Destination unit: Turn unit Off, press and hold
SCANNER buttons 8, 9 and SCENE button 2 then
turn unit back On.
1) Source unit: Turn unit Off, press and hold SCANNER
buttons 2, 3 and SCENE button 1 then turn unit back On.
Notes : Notes :
3.8 Data Transfer 3.8 Data Transfer
3) Both units are now ready to transmit and receive.
Press SCENE buttons 7 & 8 simultaneously on
Source unit to begin transmission.
The display should show TRANSMIT, this indicates it
is ready to transmit data.
The display should show RECEIVE, this indicates it is
ready to receive data transmission.
The Blackout button brings all lighting output to 0 or off.
3.7 Midi Operation 3.7 Midi Operation
The controller will only respond to MIDI commands on the MIDI channel which it is set to full stop. All
MIDI control is performed using Note on commands. All other MIDI instructions are ignored. To stop a
chase, send the blackout on note.
3) Press and hold the MIDI/REC button for 3 seconds
to save settings.
4) To release MIDI control, press any other button
except the BANK buttons during step 2.
MIDI NOTE
00 t o 07
08 t o 15
16 t o 23
24 t o 31
32 t o 39
40 t o 47
48 t o 55
56 t o 63
64 t o 71
72 t o 79
80 t o 87
FUNCTION (TURN ON/OFF) FUNCTION (TURN ON/OFF)
Scenes 1~8 in BANK 1
Scenes 1~8 in BANK 2
Scenes 1~8 in BANK 3
Scenes 1~8 in BANK 4
Scenes 1~8 in BANK 5
Scenes 1~8 in BANK 6
Scenes 1~8 in BANK 7
Scenes 1~8 in BANK 8
Scenes 1~8 in BANK 9
Scenes 1~8 in BANK 10
Scenes 1~8 in BANK 11
MIDI NOTE
88 t o 95
96 to 103
104 to 111
112 to 11 9
120
121
122
123
124
125
126
FUNCTION (TURN ON/OFF) FUNCTION (TURN ON/OFF)
Scenes 1~8 in BANK 12
Scenes 1~8 in BANK 13
Scenes 1~8 in BANK 14
Scenes 1~8 in BANK 15
Chase 5
Chase 4
Chase 3
Chase 2
Chase 1
Chase 6
BLACKOUT
It is possible to transfer the programs stored in one DMX-240A controller to another. Connect from the
DMX output of the programmed controller to the DMX input of the other.
17/20
DMX 512 CONTROLLER SERIES
USER MANUAL