C2G 29505 WIRELESS DIGITAL SIGNAGE DISTRIBUTION SYSTEM - Manual (Page 20)

19
Video Parameter Settings
For the video parameters, configure Digital/Analog Mode, Codec Size and Frame Rate.
Select a mode at Digital/Analog Mode according to the input signal from the player. Codec
Size and Frame Rate are the settings to determine the followings:
In most cases, the default settings are recommended.
If both settings are set larger, data loss or frame from may occur frequently since the size
of the distributed video data is increased.
When you change both settings, set a priority on either of them and specify a lower value
for the one with a lower priority.
1. Click Configuration – Basic in the left pane.
2. In the page displayed, select a mode at Digital/Analog Mode.
3. Configure Video Mode when necessary.
3.3 P RODUCT C ONFIGURATION